The issue I can see with that model is that, depending on how exactly it is implemented, it might end up spilling into places that involve people who were doing nothing unreasonable. For example, suppose a criminal makes a pipe gun, or a 3-d printed one, and uses that in a crime. If we’re always looking down the chain, do we also hold responsible whoever sold them the pipes, or the printer, or other machining tools? The easy enough answer is to except steps that don’t usually have to do with firearms I suppose (where the people involved would not generally have reason to expect the purchaser is using what they buy for those purposes), but in taking that obvious step, one would create a situation where acquiring guns through less traceable and safe means becomes easier than the ways that can be tracked, which is rarely a good thing if you want rules to actually be followed.
Personally, I think that, rather than the guns themselves, the focus of gun control measures should be on the ammunition they fire. It doesn’t last as long as a gun potentially can, and is disposable, meaning that the large number of guns already in circulation poses less of an issue, and is harder to manufacture at home due to the requirement for explosive chemicals. Further, most “legitimate” civilian uses for a gun either don’t require all that much of it (like hunting), or can be done in a centralized location that can monitor use (like sport target shooting at a professionally run shooting range).
What I would do, is put a very restrictive limit on how much ammunition a given person may purchase in a given year, and only allow exceptions to that limit if the person can provide proof that an equivalent amount of their existing allotment has been fired, returns old ammunition for exchange, or purchases the extra at a licensed range that as a condition of the license must monitor patrons and ensure those bullets are either fired or refunded before the shooter leaves.
3d printed guns/ghost guns are a whole different mess that can be trivially solved by controlling the barrels. People underestimate how much material science goes into making a gun barrel and can just look at any documentation on The Troubles for how often pipe guns exploded in the hands of those who use it.
Also, people don’t like it but that can also be more or less trivially solved through simple (basically computer vision but) AI/ML that can detect if you are printing a glock or if that cavity is the perfect size for an AR-15 fire control group. And companies like Bambu are already doing everything they can to lock down slicers to proprietary software that will make this easy.
but in taking that obvious step, one would create a situation where acquiring guns through less traceable and safe means becomes easier than the ways that can be tracked, which is rarely a good thing if you want rules to actually be followed.
Which sounds like a good thing to me. I would much rather people have to have technical know how (because printing that STL you bought on the fun site is not as easy as you would expect. Old Vice had a great video on this) rather than just buying a gun at walmart or one of the many “untraceable” guns that “fell off the back of a truck” on their way to said walmart.
I am also a fan of controlling ammunition (buy as much as you can shoot at the range but you need to keep it there) but it really doesn’t take much ammo to wipe out a kindergarten class.
The issue I can see with that model is that, depending on how exactly it is implemented, it might end up spilling into places that involve people who were doing nothing unreasonable. For example, suppose a criminal makes a pipe gun, or a 3-d printed one, and uses that in a crime. If we’re always looking down the chain, do we also hold responsible whoever sold them the pipes, or the printer, or other machining tools? The easy enough answer is to except steps that don’t usually have to do with firearms I suppose (where the people involved would not generally have reason to expect the purchaser is using what they buy for those purposes), but in taking that obvious step, one would create a situation where acquiring guns through less traceable and safe means becomes easier than the ways that can be tracked, which is rarely a good thing if you want rules to actually be followed.
Personally, I think that, rather than the guns themselves, the focus of gun control measures should be on the ammunition they fire. It doesn’t last as long as a gun potentially can, and is disposable, meaning that the large number of guns already in circulation poses less of an issue, and is harder to manufacture at home due to the requirement for explosive chemicals. Further, most “legitimate” civilian uses for a gun either don’t require all that much of it (like hunting), or can be done in a centralized location that can monitor use (like sport target shooting at a professionally run shooting range).
What I would do, is put a very restrictive limit on how much ammunition a given person may purchase in a given year, and only allow exceptions to that limit if the person can provide proof that an equivalent amount of their existing allotment has been fired, returns old ammunition for exchange, or purchases the extra at a licensed range that as a condition of the license must monitor patrons and ensure those bullets are either fired or refunded before the shooter leaves.
3d printed guns/ghost guns are a whole different mess that can be trivially solved by controlling the barrels. People underestimate how much material science goes into making a gun barrel and can just look at any documentation on The Troubles for how often pipe guns exploded in the hands of those who use it.
Also, people don’t like it but that can also be more or less trivially solved through simple (basically computer vision but) AI/ML that can detect if you are printing a glock or if that cavity is the perfect size for an AR-15 fire control group. And companies like Bambu are already doing everything they can to lock down slicers to proprietary software that will make this easy.
Which sounds like a good thing to me. I would much rather people have to have technical know how (because printing that STL you bought on the fun site is not as easy as you would expect. Old Vice had a great video on this) rather than just buying a gun at walmart or one of the many “untraceable” guns that “fell off the back of a truck” on their way to said walmart.
I am also a fan of controlling ammunition (buy as much as you can shoot at the range but you need to keep it there) but it really doesn’t take much ammo to wipe out a kindergarten class.