Sorry if this is a dumb question. My current gaming setup is a Intel I7-4790k, 32Gb ram and a RTX 2080 Super. I came across a AMD Threadripper 1920x, mobo, 64Gb ram for free basically.

Is that worth the time/effort to swap over? It seems to me it would be, but when I search around for info I get conflicting opinions. So any input/insight is appreciated.

Edit: Thank y’all very much! I think I was overthinking single threaded performance.

  • dinckel@lemmy.world
    link
    fedilink
    English
    arrow-up
    12
    ·
    1 天前

    If it were for money, I would have said no, but if you can get this for practically free, then yeah, it’ll be a huge upgrade

  • lime!@feddit.nu
    link
    fedilink
    English
    arrow-up
    9
    ·
    1 天前

    if you have cooling and power handled, yes. the threadripper has like 3.5x the tdp.

  • HC4L@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 天前

    If you run Windows, I don’t think this CPU is officially Windows 11 compatible.

  • Nollij@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 天前

    Some quick googling suggests that their single-thread performance is really close, but the AMD has triple the cores. Plus extra RAM is always good, and looks to be the newer and faster DDR4.

    The main question for you becomes how multi-threaded your needs are. If you don’t need more than 4 cores, then switching won’t give you anything more. There’s also the smaller question about RAM, with the same criteria.

    If your needs are highly multi-threaded, or RAM-constrained, then switching will be very worthwhile.

  • Addv4@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 天前

    Assuming it’s free and you weren’t planning to update to the newest stuff, yeah it’s a nice upgrade. Next up is a gpu upgrade…

  • Avid Amoeba@lemmy.ca
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 天前

    As others have said, for the money, absolutely. The only thing to mind is that if you use high-bandwidth USB applications, like using a multi-bay storage box, you may encounter USB dropouts. This is common to many AMD platforms up to 5th gen Ryzen. If you get hit by that, install a PCIe USB controller and you’d be set.

    • paper_moon@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 天前

      Is this just specific motherboards, or is it a bug with the actual CPUs? I’m looking to upgrade my old server which is similar to OP, an old i7-4770 and probably going to be buying AMD for next upgrade, haven’t heard of this USB dropouts as I haven’t really been paying attention.

      • Avid Amoeba@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 天前

        It’s a CPU and chipset bug. AMD CPUs have built-in IO chipset that provides USB among other things. Most chipsets other than X570 use a different IO chip with different performance characteristics. The X570 chipset contains the same IO chip that the CPUs have so it’s got the same characteristics. Depending the board some ports might be wired to the CPU others to the chipset. It’s hard to know. The only certain combination is that a X570 boards have this issue. I don’t know what USB chip is contained in the Threadripper boards. Either way, you use your board and if you notice USB dropouts when using high-bandwidth applications, get a PCIe controller for that. There’s no other solution and there’s no point spending time trying to workaround it. You can find many reports on the web. I was hit by this and tried even different boards till I finally gave up and got a add-in card. The AM5 platform seems to not suffer from this. I’m using the onboard USB controller on a X870 board at the moment. There’s ptobably not much point of getting Intel just for this. I considered that and the performance per dollar was still much better on AMD even if having to buy a USB PCIe controller.

          • Avid Amoeba@lemmy.ca
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            24 小时前

            Another trick to keep in your arsenal if you need more ports is to get a very high-speed USB adapter and split it using a hub. E.g. 20 or 40Gbps port split via 4/7-port hub still gives you 3-10Gbps per port. Note that over 5Gbps cable quality starts to really matter.